Surfacing Tissue
Surfacing Tissue is outer layers of Glass fiber Reinforced Plastic (FRP).
Request a quoteSurfacing Tissue is outer layers of Glass fiber Reinforced Plastic (FRP). Uniform distribution, low absorption,quick saturation of resin, soft surface and easy forming are most important features of this tissue. This type of tissue is capable of increasing the outer tension of FRP, increasing the resistance against pressure and making the outer surface uniform and resistance against corrosion.
RSC is proud to produce and deliver Surfacing tissue is the outer layer of fiberglass reinforced plastic (FRP) normally produced in 30 grammage weight and cut in 40-4000mm width rolled over 3-inch hard paper pipes ready to be sent for customers in stretched pallets in special carton packaging. Evidently, this product may be customized and delivered in any dimension and grammage according to customer requirements. Following table shows specifications of this type of tissue.
Technical specifications
| Specification | Standard value | Unit |
|---|---|---|
| Type of Glass | ECR | – |
| mass per unit area | 30±3 | g/m2 |
| tensile strength length wise | ≤45 | N/50mm |
| tensile strength crosswise | ≤15 | N/50mm |
| Roll width | 40-2000 | MM |
| roll length | <5000 | m |
| binder content | 6-11 | % |
| Thickness | 0.03 ± 0.2 | mm |
| – | Binder Type | Modified UF |
